Copper Terminals Supplier

The circular pre-insulated terminal, also known as the circular cold-pressed terminal, is one of the cold-pressed terminal specifications. The electronic connector and the air conn...

Cable Fittings manufacturer

Expand Nail is made of PE. PE is a thermoplastic resin obtained by polymerizing ethylene.Industrially, copolymers of ethylene and a small amount of an α-olefin are also included. P...

Metal cable connector supplier

metal waterproof Cable Gland is made of brass.Brass is an alloy composed of copper and zinc. Brass composed of copper and zinc is called ordinary brass. If it is a mixture of two o...

Nylon Cable Gland supplier

PG Nylon Cable Gland PG Nylon Cable Gland is made of nylon 66 Hemetic Seal:nitrile rubber.Nitrile rubber is prepared by emulsion polymerization of butadiene and acrylonitrile.The n...

Copper Cable Lugs supplier

These products are suitable for the connection of copper conductors (section 1.5-1000mm2) ?in power cable with electronic equipment they are made of with higher 99.9% percent pure ...

Cable Gland Supplier

Waterproof Nylon Cable Connector is made of UL-approved nylon 66. It is made by injection molding and has a fire rating of 94V-2. It has good acid resistance, corrosion resistance,...

Cable tie supplier

It is made of plastic injection molding and has a fire rating of 94V-2. It has good acid resistance, corrosion resistance, insulation resistancecable-tie-supplier, and is not easy ...

Copper Terminals manufacturer

Cord End Terminals-Twin Cable Type is made of PP+Copper and the main material is Copper.Used in molds, nickel-plated, chrome-plated, silver-plated and gold-plated to repair worn pa...

Terminal block supplier

These products are suitable for the connection of copper conductors (section 1.5-1000mm2) ?in power cable with electronic equipment they are made of with higher 99.9% percent pure ...

Cable accessories Supplier introduction

PE spiral wound with reinforced plastic for winding forming, using a spiral winding machine to make a winding of a resin-impregnated winding or a spiral winding....

Cable accessories supplier

The R-type nylon cable clamp is made of nylon 66 94V-2. Nylon 66 is a crystalline engineering plastic. It is a high toughness material with a low coefficient of friction, wear resi...

Stainless steel cable tie Supplier

Supplier introduction Yueqing Qiligang Plastic Co., Ltd was established in 1996, is specialized in manufactuing and selling various plastic products, such as nylon cable ties, nai...

Cable tie Contacts supplier

The PVC stainless steel cable ties are made of 304 and 316 stainless steel, and the surface is sprayed with PVC. Stainless steel cable ties are the most effective way to secure cab...

nylon cable tie Supplier

The cable tie holder is mainly used to fix the cable. The holder is self-adhesive and comes with a sponge glue....

Pre-insulated terminal supplier

The circular pre-insulated terminal, also known as the circular cold-pressed terminal, is one of the cold-pressed terminal specifications. The electronic connector and the air conn...

Insulated terminal supplier

The tubular pre-insulated terminal is one of the types of cold-pressed crimp terminals, and is also referred to as a pin-type cold-pressed terminal in the industry....

Stainless steel cable tie manufacturer

Insulated spade terminals have a maximum electrical power of 600 Volts and a maximum operating temperature of 75 °C. The material used for the terminal is copper, the plating mater...

Waterproof cable connector supplier recommended

1. In order to ensure waterproof and longer operation, it is recommended to use double-walled heat-shrinkable sleeves and insulating sleeves....

Cable accessories manufacturer introduction

base set piece adhesive base is made of UL-approved nylon 66.It is made by injection molding and has a fire rating of 94V-2. It has good acid resistance, corrosion resistance, insu...

Stretched nylon cable ties supplier

Expand Nail is made of PE.PE is a thermoplastic resin obtained by polymerizing ethylene.Industrially, copolymers of ethylene and a small amount of an α-olefin are also included....

Cable strap manufacturer

Releasable Cable Ties is made of UL-approved nylon 66. It is made of plastic injection molding and has a fire rating of 94V-2. It has good acid resistance, corrosion resistance, in...

Cable accessories manufacturer

Yueqing Qiligang Plastic Co., Ltd. specializes in the production and sale of various plastic products, such as nylon cable ties, nail clips, expansion screws, nylon cable glands, w...

Stainless steel cable tie manufacturer recommended

Yueqing Qiligang Plastic Co., Ltd. was established in 1996, specializing in the production and sale of various plastic products, such as nylon cable ties, nail clips, expansion scr...

Nylon cable tie use problem

We often use nylon cable ties, so we have a certain understanding of the problems that often occur, it is like yellowing, do you know what caused it?...